Homeowners' pick for appliance repair across California
Cooktop Repair — Book a Visit Today
We repair gas, electric radiant, and induction cooktops across California as an independent shop, and the visit starts with the symptom you describe. From there we work through power, gas supply, and the part that's actually failing. Under the glass or the grates, the usual suspects are spark modules, igniter electrodes, gas valves, induction coils and their control boards, radiant elements, and touch panels that quit reading fingers. A cooktop tends to quit in small ways first. One burner clicks forever, an induction zone drops out mid-boil, or a gas flame goes yellow and leaves soot on the pan. Sacramento heat and hard-water spatter both age these things faster than people expect. Call us and tell us what the burner does.
Call (888) 352-5066- Real people on the phone
- 7 days a week
- Quote in writing before any work
Taking calls until 5:00 PM PT
The cooktop symptoms we hear most
- "It clicks and clicks but never lights" Spark module, wet or cracked igniter electrode, or a clogged burner port
- "The flame is orange and my pans are turning black" Air-to-gas mixture, blocked burner ports, or a misaligned burner cap
- "My induction zone shuts off after a few minutes" Cooling fan blockage, thermal cutout, or a failing coil and inverter board
- "The touch controls ignore me or turn on by themselves" Cracked or moisture-trapped glass touch panel, or a bad control board ribbon
- "One radiant element stays cold while the others heat" Open heating element, burned terminal block, or a failed infinite switch
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1Make sure the breaker is fully on, since a half-tripped double breaker can kill one side of an electric cooktop.
- 2Check that other gas appliances still light, which tells you whether the problem is the cooktop or the gas supply.
- 3Pull off the burner caps and grates and look for spilled food packing the tiny flame ports.
- 4On induction, stick a fridge magnet to the pan's base and confirm it holds before you assume the zone is dead.
Guides & troubleshooting
Why homeowners pick a local independent shop
| CK Repair | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Written quote before any work | ✓ | ✕ | ✕ |
| Phones answered by people, every day | ✓ | ✕ | ✓ |
| Every major brand, gas or electric | ✓ | ✓ | ✕ |
| Independent shop, nobody's quota | ✓ | ✕ | ✓ |
| Crews familiar with homes like yours | ✓ | ✕ | ✓ |
Homeowners on how the visit went
“Called at 8, booked by 8:15, fridge cold before dinner. I did not expect that speed.”
Angela P.San Mateo, CA“He explained every step before touching a screw. Quote on paper first, then the work.”
Luis G.Compton, CA“Our oven was running forty degrees cold for months. One sensor later, cookies come out right again.”
Renee W.Ventura, CACooktop Repair — quick answers
Is a cracked glass cooktop worth repairing?
Sometimes. A chip at the edge may be cosmetic, but a crack that goes through the surface lets spills reach the elements and wiring underneath, and that's a shock and short risk. We inspect the crack, test what still works, and tell you honestly whether a glass replacement makes sense.
Why does my gas burner keep clicking after it lights?
The spark module usually thinks the flame is missing. A wet or greasy igniter, a cracked ceramic electrode, or a burner cap sitting slightly off can all cause it. We clean and reseat the parts first, then test the module before replacing anything.
Do you work on induction cooktops?
Yes. Induction failures tend to be electronic: inverter boards, coils, fans, and temperature sensors. We diagnose which zone circuit is out and check ventilation underneath, since a blocked cabinet or dusty fan makes zones cut out under load.
Can hard water damage a cooktop?
Indirectly, yes. Boil-overs from mineral-heavy water leave scale that bakes onto glass and packs gas ports. On sealed burners that scale traps moisture near the igniters. Wipe spills while the surface is warm, not hot, and the buildup stays manageable.
How long does a typical cooktop repair take?
Many visits are done in one trip when the failed part is a common igniter, element, switch, or valve. Control boards and glass surfaces for specific models sometimes need ordering, so we confirm the part number on site and schedule the return.
Should I keep using a cooktop with one dead burner?
For electric, usually yes, though a burned terminal block can get worse. For gas, stop if you smell gas or see a flame lifting off the burner. Shut off the supply and call us; unlit gas flowing into a kitchen is not something to wait out.
How it works
- Step 1
Tell us the symptom
Call us or fill out the form, then describe what you hear, smell or see. Odd noise, standing water, no heat. Have the model number handy if you can reach it.
- Step 2
We schedule a visit
Pick a window that fits your day. We confirm the address and ask a few questions first so the van carries parts that commonly fail on your machine.
- Step 3
Diagnose and repair
Our technician tests the machine, explains what failed and lays out your repair options. Many jobs finish the same visit. If a part has to be ordered, we schedule the return before we leave.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Hard water knowledgeSacramento Valley minerals scale up heating elements, valves and spray arms. We look for buildup, not just broken parts. Clearing scale and swapping clogged components keeps a dishwasher or washer from failing the same way again.
- Heat pump dryersNewer heat pump dryers dry differently, and they fail differently. Clogged condensers, blocked drains, long cycle times, all of it has a cause. We service these units and vented models too, and we tell you what the machine needs.
- Statewide coverageWe are based in North Highlands and work across California. Coastal humidity, valley heat and desert dust each stress appliances in their own way, so we factor local conditions into the diagnosis instead of guessing.
- Straight answersSome machines are worth repairing and some are not. We tell you which, based on the failed part, the age of the unit and what else is likely to go next. Then you decide.
- All major brands, gas & electricOne independent crew for Whirlpool, Samsung, GE, LG, Maytag, Bosch and more.
- Straight answersWhen a repair doesn't make sense, we tell you, sometimes before we even roll a truck.
Cooktop Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →