Dishwasher Repair — Book a Visit Today

Dishwashers in California take a beating from hard water. Scale coats the heater, clogs the spray arm holes, and stiffens the inlet valve until it barely opens. Other days the problem is simpler: a torn door gasket, a tired drain pump, a control board that forgets mid-cycle. Our visit starts with your description, then a real look inside — sump, filter, pump housing, wiring at the door hinge. We run a short cycle and watch what the machine actually does instead of guessing. Then we explain the failed part in plain words and what repair involves. Most of what we carry covers common fills, drains, and heating faults. Call us and tell us what the dishwasher does and when it stops.

Real person answers
Open 7 days
Written quotes

Call (888) 352-5066

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM PT

Dishwasher Repair — residential dishwasher being serviced

The dishwasher symptoms we hear most

"Dishes come out gritty and spotted" Scaled spray arms, clogged filter, or a water heating fault
"There's standing water in the bottom every morning" Drain pump, blocked sump, or a kinked drain hose loop
"It hums but never fills" Water inlet valve, float switch, or supply line restriction
"Water on the floor by the front edge" Door gasket, tub seal, or overfilling from a stuck valve
"Panel lights blink and the cycle quits partway" Control board, thermistor, or door latch switch dropping out

Safe things to check first

Worth a look before you call — sometimes it saves you the visit.

1Pull the bottom rack and lift out the cylinder filter, then rinse the mesh under hot water.
2Spin both spray arms by hand and poke a toothpick through any holes that look crusted shut.
3Check that the sink shutoff valve under the cabinet is fully open and the supply line isn't crimped.
4Wipe the door gasket and latch face, then close the door slowly and listen for a firm click.

Dishwasher Repair — quick answers

Why do my glasses look cloudy even with new detergent?

Hard water minerals bake onto glass during the heated dry. A rinse aid helps, and so does clearing scale from the spray arms and heater. If cloudiness stays after that, the machine may not be reaching wash temperature.

Is standing water always a clog?

Not always. A worn drain pump impeller, a failed pump motor, or an air gap packed with debris all leave water behind. We check the sump and the hose route before touching the pump itself.

Should I repair or replace a ten-year-old dishwasher?

Depends on what failed. A drain pump, valve, or gasket is usually worth fixing. Rusted tub seams or a burned control board on an older unit change the math. We tell you what we find and let you decide.

What causes a burning smell during a cycle?

Stop the machine and unplug it. Plastic that fell onto the heating element is the common cause, but a seizing motor or scorched wire connection also smells like that. Have it looked at before running another load.

How long does a typical repair visit take?

Many fills, drains, and door faults resolve in one visit when the part is a common one. Control boards and some pumps need ordering. We run a full cycle before leaving so you see it work.

Does my dishwasher need its own water treatment?

No separate treatment. Whole-house softening helps a lot in hard-water areas. Otherwise use rinse aid, run hot water at the sink before starting, and descale the interior a few times a year.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Odd noise, standing water, no heat. Have the model number handy if you can reach it.
Step 2
We schedule a visit
Pick a window that fits your day. We confirm the address and ask a few questions first, so the van carries parts that commonly fail on your machine.
Step 3
Diagnose and repair
Our technician tests the machine, explains what failed, and lays out the repair options. Many jobs finish the same visit. Special-order parts get scheduled before we leave.

Call (888) 352-5066

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Hard water knowledgeSacramento Valley minerals scale up heating elements, valves and spray arms. We look for buildup, not just broken parts. Clearing scale and replacing clogged components keeps dishwashers and washers from failing the same way again.
Heat pump dryersNewer heat pump dryers dry differently and fail differently. Clogged condensers, blocked drains and long cycle times all have causes. We service these units and vented models alike, and explain what the machine needs.
Statewide coverageBased in North Highlands, working across California. Coastal humidity, valley heat and desert dust each stress appliances in their own way. We factor local conditions into the diagnosis instead of guessing.
Straight answersSome machines are worth repairing. Some are not. We tell you which, based on the failed part, the age of the unit and what else is likely to go. Then you decide.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.