Dryer Repair in Pasadena — Book a Visit Today

Clothes still damp after two full cycles? That is the complaint we get most from Pasadena homeowners. Sometimes the heating element is open. Sometimes the thermal fuse blew because lint choked the airflow. Gas dryers can also fail at the igniter or coils and just tumble cold. Squealing usually means a drum roller or idler pulley. We repair electric and gas dryers from all major makers, independently. Note whether the drum spins, whether it heats, and any burning smell. Then call us or submit the quote form and we will schedule a look.

Real person answers
Open 7 days
Written quotes

Call (888) 352-5066

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM PT

Common dryer faults in Pasadena homes

"Clothes come out damp every time" Blocked vent, weak airflow, failed heating element or igniter, bad moisture sensor.
"It runs but blows cold air" Open thermal fuse, burned element, faulty gas valve coils, or a control board not calling for heat.
"There's a smell like something's burning" Lint packed near the element or blower, scorched belt, or a motor drawing too much current. Stop using it.
"The drum won't spin, just a hum" Broken belt, seized idler pulley, worn drum rollers, or a motor with a failed start winding.
"Loud thumping and squealing while it turns" Flat rollers, dry bearings, a worn glide, or something lodged in the blower wheel.

Pasadena coverage

We cover Pasadena ZIPs including 91101, 91104, 91105 and 91107, plus nearby Glendale, El Monte and Los Angeles.

Other repairs we do in Pasadena

All dryer repair → · All Pasadena services →

Dryer Repair in Pasadena — quick answers

Why does my dryer take three cycles to dry one load?

Almost always airflow. Lint builds up in the duct, the flap sticks, or the run is too long with too many bends. Heat has nowhere to go, so moisture stays in the clothes. We measure airflow and clear the path.

Is a burning smell an emergency?

Treat it that way. Unplug an electric dryer or shut the gas valve, then stop using it. Lint against a hot element can ignite. Call us and describe the smell so we bring the right parts.

Do you work on heat-pump dryers?

Yes. Those units dry with a sealed refrigerant loop instead of an element, so failures look different: clogged condenser fins, a full drain pump, or a stuck evaporator fan. We diagnose them the same careful way.

My gas dryer clicks but never lights. What is that?

The igniter glows, then a flame sensor tells the valve to open. When the sensor or the valve coils fail, you hear clicking and get no heat. Both are common, testable parts on a service call.

How soon can you get to my Pasadena house?

Call us and we will give you the next open window, often same week. Morning and afternoon slots are available. We ask for the brand and model so the van carries likely parts for your unit.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Odd noise, standing water, no heat. Have the model number handy if you can reach it.
Step 2
We schedule a visit
Pick a window that fits your day. We confirm the address and ask a few questions first, so the van carries parts that commonly fail on your machine.
Step 3
Diagnose and repair
Our technician tests the machine, explains what failed, and lays out the repair options. Many jobs finish the same visit. Special-order parts get scheduled before we leave.

Call (888) 352-5066

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Hard water knowledgeSacramento Valley minerals scale up heating elements, valves and spray arms. We look for buildup, not just broken parts. Clearing scale and replacing clogged components keeps dishwashers and washers from failing the same way again.
Heat pump dryersNewer heat pump dryers dry differently and fail differently. Clogged condensers, blocked drains and long cycle times all have causes. We service these units and vented models alike, and explain what the machine needs.
Statewide coverageBased in North Highlands, working across California. Coastal humidity, valley heat and desert dust each stress appliances in their own way. We factor local conditions into the diagnosis instead of guessing.
Straight answersSome machines are worth repairing. Some are not. We tell you which, based on the failed part, the age of the unit and what else is likely to go. Then you decide.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.